中文
the system is a fully automatic mag tube sheet welding system specially designed for the welding of construction machinery shaft sleeves, boiler tube sheets and boiler tie rods. it adopts taper positioner, three-dimensional gantry or intelligent balance device, with a large positioning range and realizes mag welding without wire feeding. winding, smooth wire feeding, short wire feeding distance, fillet weld in the form of tube sheet; easy and fast operation. mainly used in air conditioners, boilers, construction machinery and other industries.
suitable for construction machinery bushing welding, boiler tube sheet and boiler tie rod mag welding;
adopt taper locator, large locating range;
realize wire feeding, water, electricity and gas without entanglement, easy and fast operation;
automatic swing during welding;
assembled on the operation frame for welding, the operation frame adopts pneumatic locking device up and down, left and right, front and rear;
using 15-20kg wire feeding reel, φ1.0mm and φ1.2mm welding wire can be used;
weldable material | carbon steel |
weldable pipe diameter（mm） | φ38～φ260 |
spinning speed（rpm） | 0.23～4.6 |
torch inclination | 0º～60ºadjustable |
protective gas | argon shielding gas |
cooling method | water cooling |
cooling flow（ml/min） | ≥600 |
rated current | 320a duty cycle 60% |
yaw width（mm） | 40 |
manual height adjustment up and down（mm） | 40 |
wire diameter（mm） | φ1.0、φ1.2（standard） |
weight（kg） | 15 |
dimensions(mm) | 700×250×240 |
